{"title":"Accessories for Canon F-1 \u0026 F1n","description":"\u003cp\u003eDiscover high-quality accessories for your Canon F-1 and F-1n cameras. Our range includes body and lens rear caps, cold shoe adapters, lens hoods for Canon FD lenses (including 50mm f\/1.8, f\/1.4, f\/1.2 and 35mm f\/2, f\/3.5), as well as covers for the Servo EE finder socket. Perfect for keeping your Canon F-1 and F-1n well protected and ready for use.\u003c\/p\u003e","products":[{"product_id":"px-625-adapter-uni","title":"Universal PX625 Battery Adapter MR9 Replacement – Fits Canonet, Nikon F, Yashica Mat \u0026 Praktica","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccurate exposure values thanks to a constant 1.35V.\u003c\/strong\u003e Zinc-air batteries drop to about 1.35V under the minimal load of a CdS meter – the voltage of the original PX625 mercury cell. Flat discharge curve, no drift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversally compatible thanks to conductive plastic.\u003c\/strong\u003e Works equally well in cameras with side, bottom, and top contacts. No guessing which adapter fits your camera.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAffordable batteries, available everywhere.\u003c\/strong\u003e Hearing aid batteries type 675 are available at every pharmacy, drugstore, and online – in 6-packs for under 3 EUR.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to use immediately with 2 adapters + 6 batteries.\u003c\/strong\u003e Unpack the complete set, insert, and start shooting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy zinc-air instead of alkaline or silver oxide?\u003c\/h3\u003e\n\u003cp\u003eThe problem with LR44 or SR44: Alkaline delivers 1.5V, silver oxide even 1.55V. In cameras with CdS light meters (Olympus OM-1, Minolta SRT, Canon FTb, Rollei 35), this leads to up to 2 stops underexposure. The camera thinks it’s brighter than it actually is.\u003c\/p\u003e\n\u003cp\u003eZinc-air batteries (type 675) start at 1.45V and drop to about 1.35V under the minimal load of a CdS meter – the voltage of the original PX625 mercury cell. The discharge curve is flat, just like mercury. No voltage fluctuations, no drift over the usage period.\u003c\/p\u003e\n\u003cp\u003eThere are also zinc-air cells made directly in the PX625 format (e.g., Wein-Cells) – technically the same chemistry as hearing aid batteries, just in a different casing. The advantage of our solution: type 675 hearing aid batteries are available everywhere – pharmacy, drugstore, gas station – and cost just a fraction each.\u003c\/p\u003e\n\n\u003ch3\u003eIncluded in delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e 2x PX625 adapters, 1x battery pack (type 675)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet:\u003c\/strong\u003e Standard + 1x universal light seal set including mirror damper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete set:\u003c\/strong\u003e Set + 1x extra battery pack (type 675)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Conductive technical plastic\u003c\/li\u003e\n\u003cli\u003eCompatibility: Replaces PX625 \/ MR-9 \/ PX13\u003c\/li\u003e\n\u003cli\u003eBattery system: Enables use of PR44 \/ 675 zinc-air (1.4V)\u003c\/li\u003e\n\u003cli\u003eFit: Universal (side and bottom contact)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003ePX625 mercury batteries were the standard in many analog cameras from the 70s to the 90s. Since the EU ban, there is no direct replacement. Alkaline batteries (LR44) deliver too high and fluctuating voltage. Silver oxide cells (SR44) are stable but also too high.\u003c\/p\u003e\n\u003cp\u003eThis adapter uses common hearing aid batteries type 675 – available at every pharmacy and drugstore, in 6-packs for under 3 EUR. The adapters are made of conductive plastic and therefore work in almost all cameras: regardless of whether the battery contact is on top, bottom, or side.\u003c\/p\u003e\n\n\u003ch3\u003eTypical concerns – and our answers\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003e“Zinc-air dries out – they only last a few weeks”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTrue: After removing the protective foil, the cell starts working. In a hearing aid (constant high current consumption), a 675 cell lasts 5–12 days. In a camera, the consumption is orders of magnitude lower – a CdS light meter draws microamps, and only when actively measuring. This means the batteries last 2–3 months. At a unit price under 0.50 EUR, that’s an acceptable tradeoff.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e“1.4V is not 1.35V – will my light meter then measure incorrectly?”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1.4V is the nominal voltage under standard load. Your camera’s CdS light meter draws so little current that the voltage drops to about 1.35V. The deviation from the original is at most 0.05V – roughly 1\/3 stop. Negative film tolerates 3–5 stops of overexposure without visible quality loss. With slide film, 1\/3 EV is hardly noticeable in practice.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e“Can moisture from the zinc-air battery damage my camera?”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eZinc-air cells use atmospheric oxygen as the cathode and contain a small amount of electrolyte. The theoretical possibility of moisture release exists but is irrelevant in practice when used in cameras. Hearing aids sit directly in the ear canal and are much more sensitive to moisture than a camera battery compartment. Thousands of photographers have used this solution for years without problems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e“Why not just use an LR44?”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can – but not without consequences. 1.5V alkaline on a CdS meter calibrated for 1.35V results in systematic underexposure. In some cameras, up to 2 stops. Also, alkaline voltage fluctuates strongly over its lifetime (1.6V fresh, 1.2V empty). This makes meter readings unpredictable. Silver oxide (SR44, 1.55V) is more voltage stable but still too high. The zinc-air adapter is the only passive solution that delivers the correct voltage.\u003c\/p\u003e\n\n\u003ch3\u003ePractical tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActivation:\u003c\/strong\u003e Wait 1–2 minutes after removing the protective foil before inserting the battery. The cell needs oxygen to activate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Unopened batteries last 2–3 years. Only remove the foil when you actually need the battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery check:\u003c\/strong\u003e Some cameras (e.g., Olympus OM-1, Minolta SRT) have a battery test function calibrated exactly for 1.35V. This sometimes shows “weak” for zinc-air even though the battery is full. This is normal – the light meter still works correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReordering:\u003c\/strong\u003e Type 675 batteries are available at every pharmacy, drugstore, and online. You’re not tied to a specialty supplier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWant a rechargeable solution?\u003c\/h3\u003e\n\u003cp\u003eIf you don’t want to change disposable batteries: We developed the \u003ca href=\"\/en\/products\/ausgeknipst-ersatz-akku-ladegerat-fur-px625-mr9-varta-v80h-batterie-1-35v\"\u003ePX625 rechargeable battery with USB-C charger (V80H)\u003c\/a\u003e. A NiMH battery with 1.25–1.30V operating voltage, rechargeable via USB-C. Buy once, use for years.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMore about voltage and exposure metering?\u003c\/strong\u003e\u003cbr\u003e\nIn our \u003ca href=\"\/en\/blogs\/fragen-und-antworten\/batterien-und-batterie-adapter-fur-analoge-kameras-probleme-und-losungen-faq\"\u003eFAQ article on batteries and adapters for analog cameras\u003c\/a\u003e, we explain all alternatives in detail – including voltage comparison and when which solution is right.\u003c\/p\u003e\n\n\u003c!-- BATTERY_COMPAT_BLOCK_START --\u003e\n\u003cdiv class=\"battery-compatibility-block\" style=\"margin-top: 2em; padding-top: 1.5em; border-top: 1px solid #e0e0e0; font-size: 0.95em;\"\u003e\n  \u003ch3\u003eCompatibility\u003c\/h3\u003e\n  \u003cp\u003eFits various cameras, including:\u003c\/p\u003e\n  \u003cul style=\"margin-bottom: 1.5em;\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCanon:\u003c\/strong\u003e Canonet series (QL17, QL19, 28, G-III), F series (F-1, FT, FTb, FX), Demi \/ Dial series \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-px625#canon\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNikon:\u003c\/strong\u003e F series (F, F Photomic, FTN), Nikkormat \/ Nikomat series (FT, FTN) \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-px625#nikon\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMinolta:\u003c\/strong\u003e SR-T series (100-303, MC, SC, Super), SR series (1, 7, 100-505), Hi-Matic series (7, 7S, 9, 11) \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-px625#minolta\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOlympus:\u003c\/strong\u003e OM-1 series (OM-1, MD, N), 35 series (RC, RD, SP, DC), Pen series (F, FT, D2, EED) \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-px625#olympus\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePentax:\u003c\/strong\u003e K series (K2, KM, KX), Spotmatic F, H series (H1a, H3v) \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-px625#pentax\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRollei:\u003c\/strong\u003e 35 series (35, 35S, 35T, Classic), SL35 series (SL35, SL35M, SL350), XF35 \/ A26 \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-px625#rollei\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\u003cstrong\u003eNot sure if the battery fits your camera?\u003c\/strong\u003e\u003cbr\u003e\n  \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-px625\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHere is a complete list of all cameras compatible with the PX625 battery type.\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- BATTERY_COMPAT_BLOCK_END --\u003e","brand":"Ausgeknipst","offers":[{"title":"Standard: Adapter + Batteries","offer_id":51112791671124,"sku":"1191b","price":19.95,"currency_code":"EUR","in_stock":true},{"title":"Set: Adapter + Light Seal","offer_id":54014856200532,"sku":"1191b + 1078b","price":33.9,"currency_code":"EUR","in_stock":true},{"title":"Complete: Adapter + Light Seal + Batteries","offer_id":54014856331604,"sku":"1191b + 1078b + 1001v","price":38.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/px625-adapter-uni.png?v=1739982058"},{"product_id":"lichtdichtung-set-fur-canon-minolta-olympus-nikon-analog-spiegelreflex-kamera-universal-light-seal-von-ausgeknipst_b0ccpmbqyk_","title":"Light Seal Kit Universal + Mirror Damper for 35mm SLR Cameras","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits all 35mm SLR cameras.\u003c\/strong\u003e 414 compatible models from 26 manufacturers – Canon, Nikon, Minolta, Olympus, Pentax, Yashica, and many more. One set, one solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete tool set for DIY replacement.\u003c\/strong\u003e Self-adhesive sealing strips in 4 widths, mirror damper, tweezers with scraper, cotton swabs, masking tape, and illustrated instructions. You only need isopropanol.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial for 2–3 cameras instead of just one.\u003c\/strong\u003e Universal strips to cut – more robust and flexible than model-specific laser cuts that tear when inserted into narrow grooves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMirror stop damper included.\u003c\/strong\u003e The often forgotten wear part: Without a functioning damper, the mirror slams hard with every release, causing vibrations that reduce sharpness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eVideo tutorial: Replace light seals in 30 minutes\u003c\/h3\u003e\n\u003cp\u003eIn our video, we show the complete replacement step by step on a Pentax ME Super – the method works identically for Canon AE-1, Olympus OM-1, Minolta SRT, and all other 35mm SLRs.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=iFmZm-2QuFM\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWatch video: How to change light seals on a 35mm SLR (DE subtitles) →\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find the detailed step-by-step guide with photos in our \u003ca href=\"\/en\/blogs\/guide\/so-ersetzt-du-die-lichtdichtungen-deiner-analogkamera\"\u003eblog article: How to replace the light seals of your analog camera →\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor 1–2 cameras:\u003c\/strong\u003e Light-sealing strips (self-adhesive, 4 widths), mirror stop damper, tweezers with scraper, cotton swabs, masking tape, instructions (DE\/EN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor 2–3 cameras:\u003c\/strong\u003e Double amount of sealing material + mirror stop damper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith film window seal:\u003c\/strong\u003e Like \"For 1–2 cameras\" + additional seal for the film window (Leica R, Contax, Ricoh)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy universal instead of pre-cut?\u003c\/h3\u003e\n\u003cp\u003eModel-specific laser cuts sound precise but have practical drawbacks: The 1 mm thin strips for the back cover edge tear when inserted into the narrow groove. If one strip is damaged, the entire kit is wasted. Universal strips are more durable, can be flexibly wrapped around any bend of the back cover, and provide enough material for 2–3 cameras – instead of just one.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Special light-sealing foam (self-adhesive)\u003c\/li\u003e\n\u003cli\u003eWidths: 1 mm, 1.5 mm, 2 mm, 3 mm strips\u003c\/li\u003e\n\u003cli\u003eType: Universal strips (cut to the required length)\u003c\/li\u003e\n\u003cli\u003eQuantity: Enough for about 2–3 cameras\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eAlmost every analog camera from the 60s to the 80s has the same problem: The original sealing foam deteriorates after 20–40 years into a sticky, crumbly mess. The consequences are twofold: Light seeps through the leaky spots onto the film, causing bright streaks or spots on your shots. At the same time, the sticky residue gets into the mechanics – on the mirror, the shutter curtain, the film guide.\u003c\/p\u003e\n\u003cp\u003eThe vast majority of cameras available on the used market are sold with defective light seals. If the seller doesn’t explicitly mention it, you can assume the seals need to be replaced. This set contains everything for a DIY replacement – the only extra item you need is isopropanol from the pharmacy.\u003c\/p\u003e\n\n\u003ch3\u003eTypical concerns – and our answers\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003e“I’m not handy – can I do this myself?”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The replacement requires patience but no craftsmanship skills. We have sealed hundreds of cameras in our workshop and documented the method so that even beginners can do it on a quiet afternoon. \u003ca href=\"\/en\/blogs\/guide\/so-ersetzt-du-die-lichtdichtungen-deiner-analogkamera\"\u003eOur step-by-step guide with photos\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.youtube.com\/watch?v=iFmZm-2QuFM\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eaccompanying video\u003c\/a\u003e show every step.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e“The self-adhesive strips stick to the tweezers instead of the groove”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the most common frustration point. Two solutions: First, only peel off the protective film in 2–3 cm sections, not all at once. Second, the isopropanol trick from our community: Slightly moisten the adhesive side with isopropanol. The adhesive loses its stickiness for 1–2 minutes, allowing you to position the strip stress-free – once the alcohol evaporates, it sticks firmly.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e“I can’t get the strip into the very narrow grooves”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlternative without adhesive: Just leave the protective film completely on and press the strip without adhesive into the groove. The friction in the tight groove holds the foam reliably in place. Several customers and we ourselves have been using this method for years without problems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e“Do I really need a new mirror damper? Mine still looks okay”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf the damper is even slightly crumbly: Yes. Without a functioning damper, the mirror slams hard against the upper stop every time you release the shutter. This causes noticeable vibrations during long exposures and accelerates wear on the mirror mechanism. Also, foam crumbs end up directly on the focusing screen and mirror.\u003c\/p\u003e\n\n\u003ch3\u003ePractical tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove the back cover:\u003c\/strong\u003e On most 35mm SLRs (Canon AE-1, Olympus OM-1, Pentax ME), the back cover can be removed without tools by pulling on the hinge pin. Working on a loose door is much easier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtect the shutter:\u003c\/strong\u003e Before working, cover the shutter curtain with painter's tape. The curtain is extremely thin – never touch it with tools or fingers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid film counter opening:\u003c\/strong\u003e On the back cover (usually top right) there is a small opening for the film counter reset. No isopropanol or sealing material should enter here.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocusing screen: No alcohol.\u003c\/strong\u003e Isopropanol permanently damages the focusing screen. When replacing the mirror damper, place a cut Post-It over the mirror and focusing screen to catch debris.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal cleaning:\u003c\/strong\u003e Clean the outside of the body with a slightly damp microfiber cloth and a drop of dish soap. Avoid water in body crevices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFits all analog 35mm single-lens reflex cameras (SLR) with standard sealing grooves. The most common models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanon:\u003c\/strong\u003e AE-1, AE-1 Program, A-1, AT-1, AV-1, F-1, FTb, EF, TX, TLb, EX Auto\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNikon:\u003c\/strong\u003e FM, FM2, FM2n, FE, FE2, FA, FG, FG-20, EM, F2, F3, Nikkormat FTn\/FT2\/EL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinolta:\u003c\/strong\u003e SRT 101\/102\/303, X-700, X-500, X-300, X-370, X-570, XD-7, XG-1, XG-2, XG-M, XG-9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOlympus:\u003c\/strong\u003e OM-1, OM-1n, OM-2, OM-2n, OM-2SP, OM-3, OM-4, OM-10, OM-20, OM-30, OM-40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePentax:\u003c\/strong\u003e K1000, ME, ME Super, MX, MV, MG, KM, KX, K2, Spotmatic, LX, Super A, P30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYashica:\u003c\/strong\u003e FR, FR-I, FR-II, FX-3, FX-3 Super 2000, FX-7, FX-D, TL Electro, Electro AX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContax:\u003c\/strong\u003e RTS, RTS II, 137 MA, 137 MD, 139 Quartz, 159 MM, S2, ST, Aria, RX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRicoh:\u003c\/strong\u003e XR-7, XR-P, KR-5, KR-5 Super, KR-10, XR-500, XR-2, TLS 401\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKonica:\u003c\/strong\u003e Autoreflex T3, T4, TC, FS-1, FC-1, FT-1, Acom-1, TC-X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePraktica:\u003c\/strong\u003e MTL 3, MTL 5, MTL 5B, B200, BCA, BC1, BX20, Super TL, LLC, VLC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFujica:\u003c\/strong\u003e ST605, ST605n, ST701, ST705, ST801, STX-1, STX-2, AX-5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChinon:\u003c\/strong\u003e CE-4, CE-5, CM-3, CM-4, CM-5, CM-7, CP-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCosina:\u003c\/strong\u003e CT-1, CT-1 Super, CT-1A, CT-7, CT-10, CT-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMamiya:\u003c\/strong\u003e MSX 500, DSX 1000, ZE, ZE-2, ZE-X, ZM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePetri:\u003c\/strong\u003e FT, FT II, FT EE, FTE, FA-1, MF-1, GX-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTopcon:\u003c\/strong\u003e RE Super, Super D, Unirex, IC-1 Auto\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMiranda:\u003c\/strong\u003e Sensorex, Sensorex II, Sensorex EE, dx-3, RE-II\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRollei:\u003c\/strong\u003e SL35, SL35M, SL35E, SL35ME\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVivitar:\u003c\/strong\u003e V3800N, V4000, 220\/SL, 450\/SLD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZenit:\u003c\/strong\u003e E, EM, ET, TTL, 11, 12, 122\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso fits many rangefinder cameras, TLRs, and point-and-shoot cameras with back cover seals. If your camera has a foam seal in the back cover, this set will work.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eCompatible Cameras\u003c\/h3\u003e\n\u003cp\u003eOur universal light seal set fits all analog 35mm cameras with foam seals. \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/lichtdichtungen#kompatibilitaet\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eView the complete list: 414 models from 26 manufacturers\u003c\/a\u003e\u003c\/p\u003e","brand":"Ausgeknipst","offers":[{"title":"For 1-2 cameras","offer_id":52442665451860,"sku":"1078b","price":19.95,"currency_code":"EUR","in_stock":true},{"title":"For 2-3 cameras","offer_id":52442665484628,"sku":"1078b x2","price":29.95,"currency_code":"EUR","in_stock":true},{"title":"With film window seal (Leica R, Contax, Ricoh)","offer_id":54015627034964,"sku":"1078b + 1468b","price":34.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/lichtdichtungen-startbild.png?v=1740585277"},{"product_id":"winder-coupler-cap-cover-abdeckkappe-von-ausgeknipst-fur-canon-f-1n-new_b0cg6nkymx_","title":"Winder cover cap for Canon New F-1","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLost the original cap?\u003c\/strong\u003e High-quality replacement for the cover of the winder connection on the camera base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection against dirt?\u003c\/strong\u003e Reliably shields the delicate coupling and contacts from dust and moisture.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eScope of delivery\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1x winder cover cap\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: PLA+ (high-performance plastic)\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eFit: Made specifically for the model\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDescription\u003c\/h3\u003e\u003cp\u003eThis cover cap protects the winder coupler and the motor drive connection of your Canon New F-1. When you are without a motor drive, it provides a smooth base plate and prevents dust from entering the camera body.\u003c\/p\u003e\u003cp\u003eWe paid special attention to distinguishing the models during production: This cap is specifically designed for the \u003cstrong\u003eCanon New F-1\u003c\/strong\u003e (recognisable by the 4LR44 battery and hybrid shutter). It does not fit mechanically on the older, purely mechanical models F-1 (Classic) or F-1n (model update 1976).\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCanon New F-1 (also known as F-1N)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":47421810803028,"sku":"1136b","price":16.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/products\/71bjnATLlBL.jpg?v=1704471076"},{"product_id":"ae-coupler-cap-cover-drive-abdeckkappe-winder-von-ausgeknipst-fur-canon-f-1n-new_b0cg6nww63_","title":"AE Coupler Cover for Canon New F-1","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal lost?\u003c\/strong\u003e Replace the missing cover on the bottom of your Canon New F-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective function:\u003c\/strong\u003e Shields the delicate contacts of the AE coupler from dust and dirt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeat appearance:\u003c\/strong\u003e Completes the camera base when no winder is attached.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x AE coupler cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Technical plastic (PLA+)\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eFit: Specifically for Canon New F-1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eAnyone who uses their Canon New F-1 without a motor drive or winder knows the problem: The small round cover for the AE coupler connection is often missing. This cap reliably closes the opening on the camera base. It protects the electronic contacts from external influences and restores the original look of your camera. Made from sturdy material, it fits precisely in the intended place.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCanon New F-1 (model from 1981, with 4LR44 battery)\u003c\/li\u003e\n\u003cli\u003eNote: Not compatible with the old, purely mechanical Canon F-1 or F-1n (before 1981)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":47421811556692,"sku":"1135b","price":16.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/products\/71pU_U44KML.jpg?v=1704471090"},{"product_id":"4lr44-batterie-adapter-von-4-x-lr44-zu-4lr44-battery-adapter-von-ausgeknipst_b0ch3ppl1b_","title":"Battery adapter (4x LR44 to 4LR44\/PX28) for Canon AE-1, A-1, Mamiya 645 \u0026 Pentax 67","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpensive specialty batteries?\u003c\/strong\u003e The 4LR44 (PX28) is often hard to find and costly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable everywhere?\u003c\/strong\u003e LR44 button cells are sold in every supermarket – this adapter makes them usable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWant flexibility?\u003c\/strong\u003e Use four affordable LR44 or high-quality SR44 cells as a replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eScope of delivery\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1x battery adapter (for 4x LR44\/SR44)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Technical plastic (PLA+)\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eInput: 4x LR44 (alkaline) or 4x SR44 (silver oxide)\u003c\/li\u003e\n\u003cli\u003eOutput: Replaces 1x 4LR44 \/ PX28 \/ V28PX (6V)\u003c\/li\u003e\n\u003cli\u003eNote: Batteries are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDescription\u003c\/h3\u003e\u003cp\u003eThis adapter allows you to operate your camera with four common LR44 or SR44 button cells instead of a single, often expensive 4LR44 (PX28) battery. Made from technical plastic (PLA+), it ensures a perfect fit in the battery compartment and provides the correct voltage of 6V. This way, you are independent of specialty batteries and can rely on standard cells that are available almost everywhere.\u003c\/p\u003e\n\u003c!-- BATTERY_COMPAT_BLOCK_START --\u003e\n\u003cdiv class=\"battery-compatibility-block\" style=\"margin-top: 2em; padding-top: 1.5em; border-top: 1px solid #e0e0e0; font-size: 0.95em;\"\u003e\n  \u003ch3\u003eCompatibility\u003c\/h3\u003e\n  \u003cp\u003eFits various cameras, including:\u003c\/p\u003e\n  \u003cul style=\"margin-bottom: 1.5em;\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCanon:\u003c\/strong\u003e A1, AE-1, AE-1 Program, AT-1, F-1N, New F-1 \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-4lr44#canon\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePentax:\u003c\/strong\u003e 67, 6x7, ES, ES II\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMamiya:\u003c\/strong\u003e 645, 645 Pro, 645 Super, 7, 7 II, RZ67 Pro \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-4lr44#mamiya\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHasselblad:\u003c\/strong\u003e 2000 FC, 201 F, 202 FA, 203 FE, 205 FCC, PME \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-4lr44#hasselblad\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eYashica:\u003c\/strong\u003e Electro 35 CC, Electro 35 CCN, Electro 35 MC, FR, FR I, FR II \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-4lr44#yashica\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNikon:\u003c\/strong\u003e EL, EL2, ELW\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\u003cstrong\u003eNot sure if the battery fits your camera?\u003c\/strong\u003e\u003cbr\u003e\n  \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-4lr44\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHere is a complete list of all cameras compatible with the 4LR44 battery type.\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- BATTERY_COMPAT_BLOCK_END --\u003e","brand":"Ausgeknipst","offers":[{"title":"Adapter + batteries","offer_id":51112140800340,"sku":"1163b","price":19.95,"currency_code":"EUR","in_stock":true},{"title":"Battery refill pack","offer_id":51112140833108,"sku":"1042v x4","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/DSC01080.jpg?v=1727269419"},{"product_id":"flash-pc-sync-kappe-cap-ausgeknipst-fur-nikon-f3-fm2-fe2-fm3a-f3t-f4-f2-fa-fg_b0chfqw4z8_","title":"2x PC Sync Cap Cover Flash Sync Socket for Nikon, Canon, Olympus, Pentax, Minolta, Leica \u0026 more","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePC sync port dusty?\u003c\/strong\u003e Dirt and corrosion are the enemies of your flash contacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal cap lost?\u003c\/strong\u003e Over the decades, these tiny parts almost always go missing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash fires unreliably?\u003c\/strong\u003e Contact issues from open sockets are a huge annoyance during shooting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera looks \"incomplete\"?\u003c\/strong\u003e Your camera is missing that final detail for the perfect visual condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRisk of value loss?\u003c\/strong\u003e Missing small parts reduce the overall impression and collector value of your gear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cu\u003eIncluded:\u003c\/u\u003e\n\u003cul\u003e\n\u003cli\u003e2x PC sync covers (Universal, standard Prontor-Compur thread)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cu\u003eTechnical specifications:\u003c\/u\u003e\n\u003cul\u003e\n\u003cli\u003eType: Standard PC sync thread (Prontor-Compur, universal)\u003c\/li\u003e\n\u003cli\u003eMaterial: Plastic (black)\u003c\/li\u003e\n\u003cli\u003eContents: 2 pieces per set – ideal as replacement or spare\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cu\u003eDescription:\u003c\/u\u003e\n\u003cp\u003eWe know this problem all too well: You’ve got yourself a dream analog SLR, but that one tiny detail is missing – the cap for the PC sync socket. Not only does it look ugly, but in the long run it leads to oxidized contacts when you actually want to connect a studio flash.\u003c\/p\u003e\n\u003cp\u003eHere’s the solution: Our universal PC sync covers in a handy 2-pack. They fit perfectly into the standardized Prontor-Compur thread of your camera and protect the sensitive electronics from dust and moisture. The PC sync socket is standardized across manufacturers – whether Nikon, Canon, Olympus, Pentax, Minolta, Contax, Leica, or medium format: one cap fits all. This way your camera looks complete again and is technically protected.\u003c\/p\u003e\n\u003cdiv style=\"background: linear-gradient(135deg, #f8f9fa 0%, #e9ecef 100%); border: 1px solid #dee2e6; border-radius: 8px; padding: 16px 20px; margin: 20px 0; font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', sans-serif;\"\u003e\n\u003cp style=\"margin: 0 0 6px 0; font-size: 14px; color: #495057;\"\u003e💡 \u003cstrong\u003eGot a Nikon with a remote socket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0; font-size: 13px; color: #6c757d;\"\u003eThen you also need a matching remote cover. Check out our sets: \u003ca href=\"\/en\/products\/8775909441876\" style=\"color: #2979FF; text-decoration: underline;\"\u003eClassic Set (2-Pin + PC Sync)\u003c\/a\u003e for F3, F4, F801 or \u003ca href=\"\/en\/products\/8775920025940\" style=\"color: #2979FF; text-decoration: underline;\"\u003eModern Set (10-Pin + PC Sync)\u003c\/a\u003e for F5, F100, D850.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cu\u003eCompatibility:\u003c\/u\u003e\n\u003cp\u003eThis cap fits \u003cstrong\u003epractically every analog and digital camera\u003c\/strong\u003e with a standard PC sync socket (Prontor-Compur thread). The socket is standardized across manufacturers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNikon:\u003c\/strong\u003e FM, FM2, FM2n, FM3A, FE, FE2, FA, F, F2, F3, F4, F5, F100, F801 (N8008), D200, D800, D850 and many more.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanon:\u003c\/strong\u003e F-1, New F-1, FTb, FT QL, A-1, AE-1 Program, T90, EOS-1, EOS-3, 5D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOlympus:\u003c\/strong\u003e OM-1, OM-1n, OM-2, OM-2n, OM-2 SP, OM-3, OM-3 Ti, OM-4, OM-4 Ti\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePentax:\u003c\/strong\u003e K1000, MX, ME, ME Super, LX, Spotmatic SP, KX, KM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinolta:\u003c\/strong\u003e SRT-101, SRT-102, SRT-303, XD7 (XD-11), X-700, X-500, X-300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContax\/Yashica:\u003c\/strong\u003e RTS, RTS II, RTS III, 139 Quartz, 167 MT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeica:\u003c\/strong\u003e M3, M4, M4-2, M4-P, M6, M7, R3, R4, R5, R6, R7, R8, R9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium format:\u003c\/strong\u003e Hasselblad 500C\/M, 503CW, Mamiya RB67, RZ67, Bronica ETR\/SQ\/GS-1, Pentax 67\u003c\/li\u003e\n\u003cli\u003eFits all cameras with a standard PC sync threaded socket.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":47421818241364,"sku":"1171b","price":17.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/products\/nikon-abdeckung.jpg?v=1738333730"},{"product_id":"finder-abdeckung-dust-cover-cap-von-ausgeknipst-fur-canon-f1-f-1n-ae-finder-fn_b0chsj6pz1_","title":"Viewfinder protective cap for Canon New F-1 FN finder","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScratches on the optics?\u003c\/strong\u003e Protects the delicate underside of the viewfinder when it is not mounted on the camera.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust in the system?\u003c\/strong\u003e Prevents dirt from entering the prism and the focusing screen when stored in the bag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection for contacts?\u003c\/strong\u003e Safeguards the electronic interfaces of the AE finder from damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Viewfinder protective cap (Bottom Cap)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: technical plastic (PLA+)\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eFit: Specific for Canon FN viewfinder mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe modular system of the Canon New F-1 allows quick switching between different viewfinders. This cover is placed directly on the underside of the removed FN viewfinders. It is designed to securely cover the glass surfaces and the electronic contacts (on the AE finder). Ideal for photographers who switch between waist-level and prism viewfinders and want to safely store their equipment in the bag.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFits all viewfinders of the Canon New F-1 system (FN):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCanon AE Finder FN\u003c\/li\u003e\n\u003cli\u003eCanon Eye-Level Finder FN\u003c\/li\u003e\n\u003cli\u003eCanon Waist-Level Finder FN\u003c\/li\u003e\n\u003cli\u003eCanon Speed Finder FN\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Not compatible with the viewfinders of the older Canon F-1 (Classic) or F-1n (model before 1981).\u003c\/p\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":47421823156564,"sku":"1186p","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/products\/81_j5T2m5fL.jpg?v=1704471186"},{"product_id":"ausgeknipst-okular-eyepiece-eye-cup-augenmuschel-mit-ring-fur-canon-f1n-f1-n_b0cpfsf489_","title":"Eyecup Eyepiece 19.5mm for Canon F-1, F-1n, New F-1","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal hard to find?\u003c\/strong\u003e Genuine eyecups for the Canon F-1 are hardly available nowadays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber brittle?\u003c\/strong\u003e If you do find one, the material is often aged, hard, or warped.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe solution:\u003c\/strong\u003e A fresh set of rubber eyecup and matching screw ring for your F-1.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x rubber eyecup\u003c\/li\u003e\n\u003cli\u003e1x screw ring\u003c\/li\u003e\n\u003cli\u003e1x counterpart (mounting ring)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 19.5 mm (standard Canon eyepiece thread)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-quality rubber (eyecup) \u0026amp; plastic (ring)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e Specially designed for the Canon F-1 series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Easy mounting with screw ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eYou love your Canon F-1, but looking through the viewfinder without a proper eyecup just isn’t the same? We know the problem: original parts are rare and often in poor condition. That’s why we developed this set.\u003c\/p\u003e\n\u003cp\u003eYou receive a fresh rubber eyecup that can be securely and firmly mounted on the eyepiece thanks to the included screw ring and counterpart. The 19.5 mm thread is precisely made for all generations of the F-1 (Classic, n, and New). This effectively shields stray light and lets you shoot as comfortably as on day one.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eTested and fitting:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCanon F-1 (classic)\u003c\/li\u003e\n\u003cli\u003eCanon F-1n (updated version)\u003c\/li\u003e\n\u003cli\u003eCanon New F-1\u003c\/li\u003e\n\u003cli\u003eAll cameras with 19.5 mm thread on the viewfinder eyepiece\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":47421831971156,"sku":"1240b","price":24.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/products\/71rDi4E0giL.jpg?v=1704471295"},{"product_id":"ausgeknipst-gehausedeckel-body-cap-fur-canon-fd-ae-1-a-1-at-1-av-1-f-1-t70-t90_b0crdzs48z_","title":"Body cap Canon FD for Canon AE-1, A-1, F-1, T90","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtect mirror and shutter?\u003c\/strong\u003e Reliably shields the camera interior from dust, moisture, and shocks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure hold?\u003c\/strong\u003e Clicks precisely into the FD bayonet, thus protecting the delicate inner parts of your camera.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable material?\u003c\/strong\u003e Made from long-lasting, technical plastic for everyday use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eScope of delivery\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1x body cap for Canon FD\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMount: Canon FD bayonet\u003c\/li\u003e\n\u003cli\u003eMaterial: PLA+ (technical plastic)\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDescription\u003c\/h3\u003e\u003cp\u003eThis body cap is an indispensable accessory for your Canon analogue camera with FD bayonet. It protects the sensitive interior of your camera from dust and dirt when no lens is attached. Precisely made so your equipment can be safely stored.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eFits all Canon cameras with FD bayonet, for example:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCanon A-1\u003c\/li\u003e\n\u003cli\u003eCanon AE-1, AE-1 Program\u003c\/li\u003e\n\u003cli\u003eCanon F-1, F-1n (New F-1)\u003c\/li\u003e\n\u003cli\u003eCanon T50, T60, T70, T90\u003c\/li\u003e\n\u003cli\u003eCanon FT, FTb (QL)\u003c\/li\u003e\n\u003cli\u003eCanon EF\u003c\/li\u003e\n\u003cli\u003eCanon AL-1\u003c\/li\u003e\n\u003cli\u003eCanon AT-1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"1 x Body Cap","offer_id":52444000321876,"sku":"1112p","price":12.95,"currency_code":"EUR","in_stock":true},{"title":"Set: 3 x Body Cap","offer_id":52444000354644,"sku":"1112p x3","price":24.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/products\/814S3AG7MmL.jpg?v=1704471343"},{"product_id":"ausgeknipst-objektivruckdeckel-rear-lens-cap-fur-canon-fd-28-35-50-85-70-210-mm_b0crf2gfyz_","title":"Lens rear cap for Canon FD \u0026 nFD lenses (28mm, 50mm, 85mm)","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal cap lost?\u003c\/strong\u003e Without protection, dust gathers directly on the rear lens – where it affects image quality the most.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnstable fit?\u003c\/strong\u003e Many replicas fit too loosely. This cap is precisely made for the Canon FD mount and locks securely in place.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x rear lens cap for Canon FD\/nFD\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Technical plastic (PLA+)\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eMount: Canon FD \/ nFD bayonet\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eA lost rear cap is more than just a nuisance. While the front lens can forgive some damage, scratches or dust on the rear lens often lead to visible image flaws. This cap was made as a functional replacement for the Canon FD system. It reliably protects the mechanics and glass of your prime and zoom lenses from dirt and damage in your camera bag.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFits all lenses with Canon FD, nFD, FL, and FT mounts, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCanon FD 50mm f\/1.8 \/ f\/1.4 \/ f\/1.2\u003c\/li\u003e\n\u003cli\u003eCanon FD 28mm f\/2.8\u003c\/li\u003e\n\u003cli\u003eCanon FD 35mm f\/2.8 \/ f\/3.5\u003c\/li\u003e\n\u003cli\u003eCanon FD 85mm f\/1.8\u003c\/li\u003e\n\u003cli\u003eCanon FD 135mm f\/2.8\u003c\/li\u003e\n\u003cli\u003eCanon FD 24mm f\/2.8\u003c\/li\u003e\n\u003cli\u003eCanon FD 70-210mm f\/4\u003c\/li\u003e\n\u003cli\u003eCanon FD 100mm f\/2.8\u003c\/li\u003e\n\u003cli\u003eCanon FD 20mm f\/2.8\u003c\/li\u003e\n\u003cli\u003eCanon FD 200mm f\/2.8\u003c\/li\u003e\n\u003cli\u003eCanon FD 35-70mm f\/3.5-4.5\u003c\/li\u003e\n\u003cli\u003eCanon FD 17mm f\/4\u003c\/li\u003e\n\u003cli\u003eCanon FD 300mm f\/4\u003c\/li\u003e\n\u003cli\u003eCanon FD 100-300mm f\/5.6\u003c\/li\u003e\n\u003cli\u003eCanon FD 50mm f\/3.5 Macro\u003c\/li\u003e\n\u003cli\u003eCanon FD 85-300mm f\/4.5\u003c\/li\u003e\n\u003cli\u003eCanon FD 35-105mm f\/3.5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":47421835018580,"sku":"1111p","price":12.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/products\/61ib4leN98L.jpg?v=1704471344"},{"product_id":"ausgeknipst-abdeckung-coupling-socket-cover-fur-canon-f1-servo-ee-finder","title":"Cover servo EE connection for Canon F-1, F-1n","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen connection socket?\u003c\/strong\u003e Closes the connection for the Servo EE Finder on the original Canon F-1 precisely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal broken?\u003c\/strong\u003e Sturdy replacement as a simple cover without the prone-to-failure flip mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly note:\u003c\/strong\u003e Secured with the two original M3 x 4mm screws (not included).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x cover for Servo EE Finder connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: PLA+ (technical plastic)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis cover reliably protects the sensitive connection socket for the Servo EE Finder on your Canon F-1 from dust and dirt. As a deliberate design choice, we have done without the often broken flip mechanism of the original and created a solid, durable cover that fits seamlessly into the design of your camera.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCanon F-1 (the first model, \"classic F-1\")\u003c\/li\u003e\n\u003cli\u003eCanon F-1n (same design, ISO up to 3200)\u003c\/li\u003e\n\u003cli\u003eNOTE: Does NOT fit the Canon New F-1 (AE, 4LR44 battery)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":49386094100820,"sku":"1367p","price":14.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/57_8d2ee213-e2ed-4766-9a1f-4f2ba20d6516.jpg?v=1720788052"},{"product_id":"ausgeknipst-iso-erinnerung-hot-shoe-film-speed-reminder-fur-leica-m3-rollei-etc","title":"ISO reminder set for flash shoe Leica M, Nikon F, Canon F-1 \u0026 more","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich film is inside?\u003c\/strong\u003e Always keep an eye on the ISO number, even without a reminder holder on the back panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust in the flash shoe?\u003c\/strong\u003e Protects open contacts and the mechanism from dirt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e7x ISO reminder aid (values: 50, 100, 200, 400, 800, 1600, 3200)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: technical plastic (PLA+)\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eConnection: standard flash shoe (ISO 518)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis set serves as an analogue memory aid for your film sensitivity. The plates are simply slid into the camera’s accessory shoe. They fit firmly and cover the shoe neatly, which is especially handy for cameras without a film box holder. Made from sturdy plastic.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eUniversally suitable for cameras with a standard flash shoe, for example:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLeica M series (M3, M4, M6 etc.)\u003c\/li\u003e\n\u003cli\u003eNikon F, F2, FM, FE series\u003c\/li\u003e\n\u003cli\u003eCanon F-1, AE-1, A-1\u003c\/li\u003e\n\u003cli\u003eOlympus OM system\u003c\/li\u003e\n\u003cli\u003eRollei 35\u003c\/li\u003e\n\u003cli\u003ePentax K series\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":49386107076948,"sku":"1369p","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/57_73976fa7-4e0c-447b-80a9-573da35d899e.jpg?v=1720788137"},{"product_id":"ausgeknipst-sucher-abdeckung-finder-dust-cover-cap-fur-canon-f-1-finder","title":"Viewfinder cover for Canon F-1 \u0026 F-1n","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen optics protected?\u003c\/strong\u003e Secures the underside of your interchangeable viewfinders from dust and scratches as soon as they are detached from the camera.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe transport?\u003c\/strong\u003e Ideal when you switch between waist-level and prism viewfinders and store the accessories in your bag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fitting replacement?\u003c\/strong\u003e Replaces the often missing original cover and fits firmly on the viewfinder housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Viewfinder cover for Canon F-1 \/ F-1n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: technical plastic (PLA+)\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003cli\u003eFit: Specific for F-1 (old) mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eAnyone who uses the modular system of the Canon F-1 knows the problem: the viewfinder not currently in use often lies unprotected in the camera bag. This cover simply slips onto the underside of the viewfinder and protects the delicate glass elements and mechanics from dirt or damage. Made from sturdy material to keep your equipment ready for use.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFits the following viewfinders of the Canon F-1 (Classic) and F-1n:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEye-Level Viewfinder (standard prism)\u003c\/li\u003e\n\u003cli\u003eWaist-Level Viewfinder (waist-level finder)\u003c\/li\u003e\n\u003cli\u003eServo EE Viewfinder\u003c\/li\u003e\n\u003cli\u003eBooster T Viewfinder\u003c\/li\u003e\n\u003cli\u003eSpeed Viewfinder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for the Canon New F-1 (FN viewfinders).\u003c\/p\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":49386190635348,"sku":"1312p","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/57_6ec8961c-4329-426d-bafd-db1ff6ce024b.jpg?v=1720788663"},{"product_id":"ausgeknipst-abdeckung-fur-mattscheibe-matte-screen-cover-cap-fur-canon-f-1-old","title":"Protective cover for focusing screen for Canon F-1 \u0026 F-1n","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarry your camera without a viewfinder?\u003c\/strong\u003e When you remove the heavy prism viewfinder to save space or weight, the delicate ground glass usually remains exposed and unprotected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective protection:\u003c\/strong\u003e This cover is mounted directly over the ground glass and reliably shields the fine glass from dust, scratches, and touches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecisely designed:\u003c\/strong\u003e Fits securely on the body, so you can safely store your camera without the viewfinder attached.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: technical plastic (PLA+)\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eFunction: cover for the viewfinder slot \/ ground glass when the viewfinder is removed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis cover fits the classic mechanical models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCanon F-1 (original, 1971)\u003c\/li\u003e\n\u003cli\u003eCanon F-1n (model update 1976, ISO up to 3200)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Not suitable for the Canon New F-1 (F-1N, from 1981, with electronic hybrid shutter).\u003c\/p\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":49386192372052,"sku":"1313p","price":22.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/57_d0f4943b-1b33-4c21-b4e5-30bf003ce0c1.jpg?v=1720788684"},{"product_id":"ausgeknipst-flash-coupler-kuppler-kaltschuh-cold-shoe-adapter-fur-canon-f-1","title":"Cold shoe adapter for Canon F-1 \u0026 Nikon F3","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo accessory shoe?\u003c\/strong\u003e Allows mounting of light meters or flash units directly on the rewind crank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProprietary connectors?\u003c\/strong\u003e Use standard equipment instead of costly or rare original adapters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecisely fitting?\u003c\/strong\u003e Specially designed for secure hold on the rewind cranks of the Canon F-1 and Nikon F3.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x cold shoe adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Technical plastic (PLA+)\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eConnection: Cold shoe (ISO 518, without contacts)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis adapter expands your Canon F-1 or Nikon F3 with a standard cold shoe. Since these cameras come from the factory with proprietary connectors on the rewind crank, mounting modern accessories is often difficult. The adapter simply slips on and provides a solid base for light meters or manual flashes. Made from technical plastic (PLA+) for durability and precise fit.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eCanon:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCanon F-1 (Classic; not F-1n)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNikon:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNikon F3 (Standard)\u003c\/li\u003e\n\u003cli\u003eNikon F3HP (High-Eyepoint)\u003c\/li\u003e\n\u003cli\u003eNikon F3P (Press\/Professional)\u003c\/li\u003e\n\u003cli\u003eNikon F3H (High-speed)\u003c\/li\u003e\n\u003cli\u003eNikon F3AF (Autofocus)\u003c\/li\u003e\n\u003cli\u003eNikon F3 Limited\u003c\/li\u003e\n\u003cli\u003eNikon F3\/T (Titanium body)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":49386210754900,"sku":"1337p","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/57_a069b2a5-9b3f-4b3b-a138-7bbee08461cd.jpg?v=1720788865"},{"product_id":"ausgeknipst-bt-52-gegenlichtblende-lens-hood-fur-canon-fd-85-f-1-8-100-f-2-2-8-4","title":"Lens hood BT-52 for Canon FD 85mm f\/1.8 \u0026 FD 100mm f\/2-2.8-4 Macro","description":"\u003cp\u003e\u003cspan\u003eLens hood with bayonet lock. Reproduction of the Canon BT-52 lens hood for FD and nFD lenses.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eCompatible with:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e- Canon New FD 85mm f\/1.8 \u003cbr\u003e- Canon New FD 100mm f\/2 \u003cbr\u003e- Canon New FD 100mm f\/2.8 \u003cbr\u003e- Canon New FD 100mm f\/4 Macro\u003c\/p\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":49386241655124,"sku":"1293p","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/57_ab9e7c31-9ff5-44a0-8407-db2f3cedbcb6.jpg?v=1720788978"},{"product_id":"ausgeknipst-bs-55-gegenlichtblende-lens-hood-fur-canon-fd-50mm-f-1-4-f-1-8","title":"Lens hood BS-55 for Canon FD 50mm (Silver ring)","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnnoying stray light?\u003c\/strong\u003e The hood reduces side light entry and ensures better image contrast.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal not available?\u003c\/strong\u003e This replica replaces the Canon BS-55 and fits precisely on the bayonet mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWant to use filters?\u003c\/strong\u003e It mounts on the outside of the lens, leaving the filter thread free.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Lens hood BS-55 (black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Technical plastic (PLA+)\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eConnection: Bayonet (BS-55 type)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis lens hood is a functional replica of the Canon BS-55. It was specially made for the early Canon FD 50mm lenses with the distinctive silver ring (Breech Lock). The part is made of technical plastic (PLA+) and effectively shields the front lens. It attaches via the bayonet mount on the lens edge.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCanon FD 50mm f\/1.4 (silver ring)\u003c\/li\u003e\n\u003cli\u003eCanon FD 50mm f\/1.4 S.S.C. (silver ring)\u003c\/li\u003e\n\u003cli\u003eCanon FD 50mm f\/1.8 (silver ring)\u003c\/li\u003e\n\u003cli\u003eCanon FD 50mm f\/1.8 S.C. (silver ring)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Not compatible with Canon New FD (nFD) lenses (black bayonet without silver ring). For the nFD 50mm f\/1.8, the BS-52 is required.\u003c\/p\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":49386242670932,"sku":"1292p","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/57_d2430df4-b88f-4b67-a3d4-8af426816d68.jpg?v=1720788991"},{"product_id":"ausgeknipst-bs-58-gegenlichtblende-lens-hood-fur-canon-fd-55mm-50-135mm","title":"Lens hood BS-58 for Canon FD 55mm f\/1.2 \/ 50-135mm lenses","description":"\u003cp\u003e\u003cspan\u003eLens hood with bayonet mount, reproduction of the Canon BS-58 lens hood for FD and nFD lenses.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eCompatible models:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e- Canon FD 55mm f\/1.2 \u003cbr\u003e- Canon FD 55mm f\/1.2 S.S.C. \u003cbr\u003e- Canon FD 55mm f\/1.2AL \u003cbr\u003e- Canon FD 55mm f\/1.2 S.S.C. AL \u003cbr\u003e- Canon FD 55mm f\/1.2 S.S.C. ASPHERICAL \u003cbr\u003e- Canon New FD 50-135mm f\/3.5\u003c\/p\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":49386245226836,"sku":"1291p","price":24.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/57_ba0fec6c-1746-455c-adc3-cbbc82d09551.jpg?v=1720789008"},{"product_id":"ausgeknipst-bs-52-gegenlichtblende-lens-hood-fur-canon-new-fd-50mm-1-1-8-1-4-1-2","title":"Lens hood BS-52 for Canon New FD 50mm f\/1.4, f\/1.8, f\/1.2","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLost your original BS-52?\u003c\/strong\u003e Our precisely fitting replacement for the standard lens hood that belongs on almost every Canon nFD 50mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDull image with the \"Nifty Fifty\"?\u003c\/strong\u003e Effectively blocks side stray light and ensures the crisp contrast your 50mm lens can actually deliver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEveryday protection?\u003c\/strong\u003e The 50mm is your \"always-on\" lens – this hood reliably protects the front lens from bumps, scratches, and rain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant note about the bayonet:\u003c\/strong\u003e Fits \u003cstrong\u003eonly\u003c\/strong\u003e the newer \"New FD\" (nFD) lenses with fully black housing (without the silver chrome ring).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure fit:\u003c\/strong\u003e Clicks precisely into the bayonet so you can still easily change filters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x lens hood (replacement for BS-52)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount: Canon nFD bayonet (fits BS-52 mount)\u003c\/li\u003e\n\u003cli\u003eMaterial: PLA+ (technical plastic)\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe 50mm standard lens is the heart of almost every Canon A-1 or AE-1 kit. But often the original BS-52 lens hood is missing, which leads to dull images in backlight. We developed this replacement so you can use the full potential of your lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning: risk of confusion:\u003c\/strong\u003e Canon made two generations of FD lenses. This hood fits \u003cstrong\u003eonly\u003c\/strong\u003e the newer \"New FD\" (nFD) version without the silver chrome ring on the bayonet. If your lens has a silver locking ring (\"Breech Lock\"), you need the BS-55.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFits the following Canon New FD (nFD) lenses:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCanon New FD 50mm f\/1.2\u003c\/li\u003e\n\u003cli\u003eCanon New FD 50mm f\/1.2L\u003c\/li\u003e\n\u003cli\u003eCanon New FD 50mm f\/1.4\u003c\/li\u003e\n\u003cli\u003eCanon New FD 50mm f\/1.8\u003c\/li\u003e\n\u003cli\u003eCanon New FD 50mm f\/2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":49386300113236,"sku":"1279b","price":22.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/57_69654d20-3a49-4676-9cb5-805974df00d8.jpg?v=1720789514"},{"product_id":"ausgeknipst-film-box-dose-behalter-case-container-fur-3x-35mm-135-film","title":"Film canister triple or fivefold for 35mm small format film (Kodak, Fuji, Ilford)","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoose film rolls in your bag?\u003c\/strong\u003e This box keeps three 35mm films safe and ready to hand in one place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorried about damage?\u003c\/strong\u003e The sturdy walls protect your unexposed or exposed films from pressure and dirt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhere to put it?\u003c\/strong\u003e Thanks to the built-in eyelet, you can easily attach the case outside with a carabiner or loop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x triple film case\u003c\/li\u003e\n\u003cli\u003e1x snug-fitting lid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Technical plastic (PLA+)\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eCapacity: 3x 35mm (135) cartridges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eOrder is essential when things need to be quick. This box was designed to hold exactly three 35mm films. The cartridges sit firmly so nothing rattles, yet are still easy to remove. Made from sturdy PLA+, the case offers protection for your emulsions, whether in your rucksack or on your belt loop.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKodak (Gold, Portra, Ektar, etc.)\u003c\/li\u003e\n\u003cli\u003eFujifilm (Superia, C200, etc.)\u003c\/li\u003e\n\u003cli\u003eIlford (HP5, FP4, Delta, etc.)\u003c\/li\u003e\n\u003cli\u003eCineStill, Fomapan and all other standard 135 35mm films\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"Can for 3x 35mm","offer_id":52443790672212,"sku":"1357b","price":24.95,"currency_code":"EUR","in_stock":true},{"title":"Can for 5x 35mm","offer_id":53568612073812,"sku":"1693p","price":29.95,"currency_code":"EUR","in_stock":true},{"title":"Set: 3x Can for 3x 35mm","offer_id":52443790704980,"sku":"1357b x3","price":49.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/57_c60a43d3-72d4-43b2-bcd8-4597b5c92335.jpg?v=1770135632"},{"product_id":"ausgeknipst-ersatz-akku-ladegerat-fur-px625-mr9-varta-v80h-batterie-1-35v","title":"PX625 Battery + USB-C Charger (V80H) for Rollei 35, Canon F-1 \u0026 more","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise exposure with 1.25–1.30V:\u003c\/strong\u003e Voltage close to the original — safe for negative film. No misexposures caused by too high alkaline voltage in CdS light meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne battery for years instead of disposables:\u003c\/strong\u003e The V80H is rechargeable via USB-C. No more expensive zinc-air cells that dry out after weeks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-made charging station instead of tinkering:\u003c\/strong\u003e Own PCB board, USB-C connection, housing with spring contacts. Plug in, charge, done.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cdiv style=\"background:#f0f9ff;border:1px solid #bae6fd;border-radius:8px;padding:16px 20px;margin:20px 0;\"\u003e\n    \u003cp style=\"margin:0 0 8px;font-weight:600;\"\u003eBattery compartment in the film chamber? No problem.\u003c\/p\u003e\n    \u003cp style=\"margin:0;font-size:14px;\"\u003eIn cameras like the \u003cstrong\u003eRollei 35\u003c\/strong\u003e or \u003cstrong\u003eLeica CL\u003c\/strong\u003e, the battery compartment is inside the film chamber — every battery change means: remove the film. With the Pro Pack (2x V80H), you can simply change the battery with every film change. No extra opening, no risk to the film.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e 1x USB-C charger + 1x V80H battery (PX625-compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro Pack:\u003c\/strong\u003e 1x USB-C charger + 2x V80H batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBattery: Varta V80H (Low Self-Discharge NiMH, 80 mAh)\u003c\/li\u003e\n\u003cli\u003eNominal voltage: 1.2 V (according to manufacturer)\u003c\/li\u003e\n\u003cli\u003eOperating voltage (plateau): 1.25 – 1.30 V\u003c\/li\u003e\n\u003cli\u003eCapacity: 80 mAh — sufficient for weeks at microampere consumption of a CdS meter\u003c\/li\u003e\n\u003cli\u003eCharging method: Gentle slow charging (C\/7) via USB-C\u003c\/li\u003e\n\u003cli\u003eCharging time: approx. 8 hours (overnight charging recommended)\u003c\/li\u003e\n\u003cli\u003eCharger material: Technical plastic\u003c\/li\u003e\n\u003cli\u003eConnection: USB-C (PD-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eMany classic analog cameras — Rollei 35, Leica CL, Olympus OM-1, Canon F-1, Minolta SRT — were designed for the 1.35V mercury battery PX625. Since the production ban, there has been no perfect replacement solution. The most common alternative (1.5V alkaline) delivers too high a voltage, which especially leads to misexposures in CdS light meters.\u003c\/p\u003e\n\u003cp\u003eThe Varta V80H solves this problem with an operating voltage of 1.25–1.30V, which is much closer to the original. It is not an ordinary NiMH battery: The V80H comes from Varta’s industrial \"Robust\" series (built for server RTC and medical technology) and uses LSD-NiMH technology (Low Self-Discharge) — its self-discharge is comparable to the Eneloop series.\u003c\/p\u003e\n\u003cp\u003eThe idea to use a V80H as a PX625 replacement comes from \u003ca href=\"https:\/\/www.troeszter.net\/Download\/PX625Batterie.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTroeszter.net\u003c\/a\u003e. Building on that, we developed an independent product: own PCB board, USB-C instead of lab power supply, housing made of technical plastic with spring contacts.\u003c\/p\u003e\n\n\u003ch3\u003eCommon concerns — and our answers\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003e“1.2V is too low — the original had 1.35V”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe nominal voltage on the datasheet is the average over the entire discharge cycle. Our measurements in a Rollei 35 show: freshly charged, the V80H delivers 1.30–1.32V. After two weeks still 1.27–1.28V. The deviation of 0.05–0.08V is within the tolerance range for negative film.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e“Only 80 mAh capacity — that’s not enough”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA CdS light meter consumes microamperes. At this current consumption, the stable voltage plateau of the V80H lasts not hours but weeks. 80 mAh is little for AA batteries — for a camera button cell it is sufficient.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e“NiMH discharges by itself”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard NiMH loses 10–20% charge in the first days. The V80H is not standard NiMH. As an LSD cell (Low Self-Discharge) from the Varta \"Robust\" series, it retains about 80% capacity after one year at room temperature — comparable to the Eneloop series.\u003c\/p\u003e\n\n\u003cdiv style=\"background:#f8f8f8;border:1px solid #e0e0e0;border-radius:8px;padding:16px 20px;margin:20px 0;\"\u003e\n    \u003cp style=\"margin:0 0 8px;font-weight:600;\"\u003ePractical notes\u003c\/p\u003e\n    \u003cul style=\"margin:0;padding-left:20px;font-size:14px;\"\u003e\n        \u003cli\u003e\n\u003cstrong\u003eBattery check:\u003c\/strong\u003e Many cameras (OM-1, Minolta SRT) have a battery check calibrated for 1.35V. The V80H shows \"empty\" there — although the light meter works perfectly. This is normal.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eCold:\u003c\/strong\u003e Below 5 degrees Celsius NiMH becomes unreliable. For winter shots in frost, a zinc-air cell or alkaline + ISO correction is the better choice.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eAfter charging:\u003c\/strong\u003e Let the V80H rest for 1–2 hours after charging before putting it in the camera. The resting voltage stabilizes during this time.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003ePower bank:\u003c\/strong\u003e Some power banks switch off at low current consumption. The charger requires a USB source that does not switch off small loads (power supply or laptop port).\u003c\/li\u003e\n    \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#f0f9ff;border:1px solid #bae6fd;border-radius:8px;padding:16px 20px;margin:20px 0;\"\u003e\n    \u003cp style=\"margin:0 0 8px;font-weight:600;\"\u003eDetailed comparison of all PX625 alternatives\u003c\/p\u003e\n    \u003cp style=\"margin:0;font-size:14px;\"\u003eWe wrote a technical guide comparing all options: alkaline, zinc-air, Schottky adapter, V80H, and DIY solutions — with measurement data, practical tests, and community feedback.\u003c\/p\u003e\n    \u003cp style=\"margin:8px 0 0;\"\u003e\u003ca href=\"https:\/\/ausgeknipst.de\/blogs\/guide\/px625-batterie-problem-alternatives-die-v80h-akku-losung-mit-usb-c-ladegerat\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"font-weight:500;\"\u003eTo the complete PX625 guide →\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Please charge the V80H battery only in the charger designed for it. Charging indicator: The blue LED shows that the USB-C cable is connected. There is no full battery indicator — a full charge takes about 8 hours.\u003c\/p\u003e\n\n\u003c!-- BATTERY_COMPAT_BLOCK_START --\u003e\n\u003cdiv class=\"battery-compatibility-block\" style=\"margin-top: 2em; padding-top: 1.5em; border-top: 1px solid #e0e0e0; font-size: 0.95em;\"\u003e\n  \u003ch3\u003eCompatibility\u003c\/h3\u003e\n  \u003cp\u003eFits various cameras, including:\u003c\/p\u003e\n  \u003cul style=\"margin-bottom: 1.5em;\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCanon:\u003c\/strong\u003e Canonet series (QL17, QL19, 28, G-III), F series (F-1, FT, FTb, FX), Demi \/ Dial series \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-px625#canon\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNikon:\u003c\/strong\u003e F series (F, F Photomic, FTN), Nikkormat \/ Nikomat series (FT, FTN) \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-px625#nikon\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMinolta:\u003c\/strong\u003e SR-T series (100-303, MC, SC, Super), SR series (1, 7, 100-505), Hi-Matic series (7, 7S, 9, 11) \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-px625#minolta\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOlympus:\u003c\/strong\u003e OM-1 series (OM-1, MD, N), 35 series (RC, RD, SP, DC), Pen series (F, FT, D2, EED) \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-px625#olympus\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePentax:\u003c\/strong\u003e K series (K2, KM, KX), Spotmatic F, H series (H1a, H3v) \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-px625#pentax\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRollei:\u003c\/strong\u003e 35 series (35, 35S, 35T, Classic), SL35 series (SL35, SL35M, SL350), XF35 \/ A26 \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-px625#rollei\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"text-decoration:none;\"\u003e[...]\u003c\/a\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\u003cstrong\u003eNot sure if the battery fits your camera?\u003c\/strong\u003e\u003cbr\u003e\n  \u003ca href=\"https:\/\/ausgeknipst.de\/pages\/batterie-px625\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHere is a complete list of all cameras compatible with the PX625 battery type.\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- BATTERY_COMPAT_BLOCK_END --\u003e","brand":"Ausgeknipst","offers":[{"title":"Standard: Charger + 1x Battery","offer_id":51292647162196,"sku":"1371b","price":49.95,"currency_code":"EUR","in_stock":true},{"title":"Pro Pack: Charger + 2x Battery","offer_id":52684796264788,"sku":"1371b + 2039v","price":54.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/varta-v80h-rollei-35s.jpg?v=1739982543"},{"product_id":"ausgeknipst-35mm-film-halter-fur-dslr-smartphone-scanning-film-holder-wie-valoi","title":"35mm Film Holder Basic — Entry into Digitizing for DSLR \u0026 Smartphone","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart affordably:\u003c\/strong\u003e Minimalist, cost-effective solution for getting started with digitizing — without unnecessary complexity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to use immediately:\u003c\/strong\u003e Simple \"sandwich\" principle with rubber band fixation. Insert film, photograph, done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOur entry-level model:\u003c\/strong\u003e Ideal if you want to try film scanning before investing in our magnetic MK2 system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eScope of delivery\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Base plate\u003c\/li\u003e\n\u003cli\u003e1x Top plate\u003c\/li\u003e\n\u003cli\u003e2x rubber bands (common household)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: PLA+ (technical plastic)\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eFormat: 35mm (35mm full frame 135)\u003c\/li\u003e\n\u003cli\u003eFixation: Rubber band (no magnet)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDescription\u003c\/h3\u003e\u003cp\u003eThe Basic film holder is our minimalist entry-level model for anyone who wants to digitize 35mm negatives with a digital camera or smartphone. The principle is simple: base and top plates are held together with rubber bands, the film lies flat in between. By pressing the side bulges, the gap opens, insert the film, place it on a light source (LED panel with high CRI recommended), photograph.\u003c\/p\u003e\u003cp\u003eCompared to our MK2 system, the Basic forgoes magnetic fixation and stray light protection — but costs just a fraction. If you want to upgrade later, simply switch to the modular MK2 Film Scanner Set 35mm.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFilm format: Standard 35mm (135) negatives\u003c\/li\u003e\n\u003cli\u003eRecording devices: DSLR, Mirrorless Cameras, Smartphones\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"margin-top:32px;padding:24px;background:#f0f0f0;border-radius:8px;border-left:4px solid #1C2228;\"\u003e\n  \u003ch4 style=\"margin:0 0 8px;font-size:16px;\"\u003eLooking for more?\u003c\/h4\u003e\n  \u003cp style=\"margin:0 0 12px;font-size:14px;color:#262626;\"\u003e\n    This film holder is our minimalist entry-level solution at a low price. For magnetic fixation, \n    Stray light protection and extended formats are available in our MK2 modular system:\n  \u003c\/p\u003e\n  \u003cul style=\"list-style:none;padding:0;margin:0;\"\u003e\n    \u003cli style=\"margin-bottom:8px;\"\u003e\n      \u003ca href=\"\/en\/products\/filmhalter-fur-canon-ae-1-pentax-k1000-nikon-f3-cs-lite\" style=\"color:#1C2228;font-weight:500;\"\u003e\n        → Film Scanner 35mm MK2 — Magnetic, Modular, Professional\n      \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli style=\"margin-bottom:8px;\"\u003e\n      \u003ca href=\"\/en\/pages\/film-scanner-finder\" style=\"color:#1C2228;font-weight:500;\"\u003e\n        → Scanner Finder — Which Set Suits You?\n      \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003ca href=\"\/en\/blogs\/questions-and-answers\/scanning-film-with-the-digital-camera-the-complete-guide-to-the-modular-scanner-setup\" style=\"color:#1C2228;font-weight:500;\"\u003e\n        → Guide: Digitizing Film with a Digital Camera\n      \u003c\/a\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":49386366402900,"sku":"1364b","price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/57_a6ca7714-ed08-475b-982e-428611ceb8aa.jpg?v=1720789989"},{"product_id":"ausgeknipst-blitz-kuppler-flash-hot-shoe-coupler-wie-as4-fur-nikon-f3-canon-f1","title":"Flash adapter cold shoe with PC cable for Nikon F3, Canon F-1","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo flash shoe on the viewfinder?\u003c\/strong\u003e The Nikon F3 and the old Canon F-1 do not have a standard ISO shoe. Our adapter solves this problem.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhere to put the flash?\u003c\/strong\u003e The adapter simply slides over the rewind crank (similar to Nikon AS-4) and provides a secure mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to use immediately:\u003c\/strong\u003e We include a 30cm long PC sync cable so you can connect your flash directly to the camera’s PC socket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure hold:\u003c\/strong\u003e Precisely fitting design that sits firmly on the camera’s rails without wobbling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Flash coupler (cold shoe adapter)\u003c\/li\u003e\n\u003cli\u003e1x PC flash cable (approx. 30cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: PLA+ (technical plastic)\u003c\/li\u003e\n\u003cli\u003eCamera connection: Rails over the rewind crank\u003c\/li\u003e\n\u003cli\u003eAccessory connection: Standard ISO accessory shoe (cold shoe)\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eYou want to use a flash with your Nikon F3 or the classic Canon F-1, but you lack the proper connection on the viewfinder? We know the problem. This adapter is the simple solution: it slides over the rewind crank and equips your camera with a standard accessory shoe.\u003c\/p\u003e\n\u003cp\u003eThis way you can mechanically attach flashes or radio triggers. Since it is a cold shoe, a suitable PC cable is included for electronic triggering, connecting the flash to your camera’s sync socket. The part is made of sturdy technical plastic and fits precisely.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNikon:\u003c\/strong\u003e F3, F3HP, F3P, F3H, F3AF, F3 Limited, F3\/T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanon:\u003c\/strong\u003e F-1 (old \/ classic \/ original), F-1n (model 1976)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e Canon New F-1 (1981).\u003c\/p\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":49386370892116,"sku":"1359a","price":39.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/57_aba215e7-a2f5-4697-ac54-e11f47dd456c.jpg?v=1720790035"},{"product_id":"ausgeknipst-bt-55-gegenlichtblende-lens-hood-fur-canon-fd-85mm-100mm-135mm","title":"Lens hood BT-55 for Canon FD 85mm, 100mm \u0026 135mm","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnnoying stray light?\u003c\/strong\u003e The hood reduces side light entry and ensures higher contrast shots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal missing?\u003c\/strong\u003e This replica fits exactly like the original Canon BT-55 and sits securely on the lens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWant to use filters?\u003c\/strong\u003e Thanks to the bayonet mount, the filter thread remains freely accessible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eScope of delivery\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1x Lens hood (BT-55 replica)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: technical plastic (PLA+)\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eMount: bayonet (BT-55 type)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDescription\u003c\/h3\u003e\u003cp\u003eThis lens hood is specially designed for the classic Canon FD lenses (chrome ring era). It replaces the original BT-55 and effectively prevents lens flare and loss of contrast in difficult lighting conditions. Made from technical plastic, it ensures high stability. The bayonet lock allows quick mounting without blocking the filter thread.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCanon FD 85mm f\/1.8 S.S.C.\u003c\/li\u003e\n\u003cli\u003eCanon FD 100mm f\/2.8 (including S.S.C.)\u003c\/li\u003e\n\u003cli\u003eCanon FD 135mm f\/3.5 (including S.C.)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":49421746209108,"sku":"1246p","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/57_d61016bd-89c2-48f1-b2a3-6a5c3639e888.jpg?v=1721306436"},{"product_id":"staubschutz-abdeckung-fur-canon-f1-f-1n-ae-finder-copy","title":"Ground glass protective cover for Canon New F-1","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScratches on the delicate ground glass?\u003c\/strong\u003e An unprotected glass draws damage like a magnet – this cover prevents that.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust in the viewfinder image?\u003c\/strong\u003e Dirt on the ground glass annoys every time you look through the viewfinder. Keep it clean, whether during storage or transport.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUncertain storage?\u003c\/strong\u003e Where to put the interchangeable screen? This cap offers the necessary protection for your Canon New F-1 parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x protective cover for ground glass (Canon New F-1)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Technical plastic (PLA+)\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eFit: Specially designed for the Canon New F-1 system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThe Canon New F-1 (model from 1981) offers an extremely flexible system with interchangeable ground glasses. However, these are delicate precision parts. As soon as you change the screen or remove the viewfinder, the glass is at risk.\u003c\/p\u003e\n\u003cp\u003eOur protective cover is precisely matched to the dimensions of the New F-1 ground glasses (FN system). It reliably protects the glass from dust, fingerprints, and scratches. Ideal for safely storing interchangeable screens in your camera bag or protecting the built-in screen when the viewfinder is removed.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCanon New F-1 (model 1981, with 4LR44 battery and hybrid shutter)\u003c\/li\u003e\n\u003cli\u003eNot compatible with Canon F-1 (Old \/ Classic)\u003c\/li\u003e\n\u003cli\u003eNot compatible with Canon F-1n (model 1976, purely mechanical)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":49751511138644,"sku":"1392p","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/DSC00295.jpg?v=1724770281"},{"product_id":"objektivdeckel-40-72mm-fur-canon-nikon-sony-und-fuji-kameras","title":"Universal lens cap (40-72mm) for Canon, Nikon, Sony \u0026 Fuji","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLost your original cap?\u003c\/strong\u003e Sturdy replacement that fits securely on your lens and protects the glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorried about the front lens?\u003c\/strong\u003e Reliably shields the glass from dust, scratches, and bumps during transport.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversally usable?\u003c\/strong\u003e Fits all lenses with the matching filter thread, no matter the maker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x lens cap (size as selected)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: plastic\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003cli\u003eMechanism: snap-on (clamping mechanism)\u003c\/li\u003e\n\u003cli\u003eSpecial feature: size 48 mm has a design with metal springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eA lost lens cap is annoying but easy to fix. This universal front cap replaces the original and keeps your glass clean and scratch-free. The clamping mechanism grips securely into your lens’s filter thread. It fits analogue and digital systems from Canon, Nikon, Sony, Fuji, and other makers, as long as the filter diameter matches.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for all lenses with the following filter threads (please check your choice):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e40 mm\u003c\/li\u003e\n\u003cli\u003e48 mm (e.g. Canonet QL17)\u003c\/li\u003e\n\u003cli\u003e49 mm\u003c\/li\u003e\n\u003cli\u003e52 mm\u003c\/li\u003e\n\u003cli\u003e55 mm\u003c\/li\u003e\n\u003cli\u003e58 mm\u003c\/li\u003e\n\u003cli\u003e62 mm\u003c\/li\u003e\n\u003cli\u003e65 mm\u003c\/li\u003e\n\u003cli\u003e67 mm\u003c\/li\u003e\n\u003cli\u003e72 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"40 mm","offer_id":49877623963988,"sku":"1123p","price":4.95,"currency_code":"EUR","in_stock":true},{"title":"49 mm","offer_id":49877623996756,"sku":"1100p","price":4.95,"currency_code":"EUR","in_stock":true},{"title":"52 mm","offer_id":49877624160596,"sku":"1101p","price":4.95,"currency_code":"EUR","in_stock":true},{"title":"55 mm","offer_id":49877624193364,"sku":"1102p","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"58 mm","offer_id":49877624029524,"sku":"1103p","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"62 mm","offer_id":49877624226132,"sku":"1104p","price":6.95,"currency_code":"EUR","in_stock":true},{"title":"65 mm","offer_id":49877624062292,"sku":"1124p","price":6.95,"currency_code":"EUR","in_stock":true},{"title":"67 mm","offer_id":49877624095060,"sku":"1125p","price":6.95,"currency_code":"EUR","in_stock":true},{"title":"72 mm","offer_id":49877624127828,"sku":"1126p","price":7.95,"currency_code":"EUR","in_stock":true},{"title":"48 mm","offer_id":50733067764052,"sku":"1469b","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/DSC00810.jpg?v=1727188530"},{"product_id":"v28px-batterie-adapter-fur-pentax-67-mamiya-645-mehr","title":"Battery adapter 4x SR44 to V28PX (6V) for Pentax 67, Mamiya RZ67 \u0026 Canon AE-1","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo special batteries at hand?\u003c\/strong\u003e Simply replace the rare 4SR44 \/ V28PX with four common SR44 or LR44 button cells.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid voltage drops?\u003c\/strong\u003e With SR44 silver oxide cells, you ensure a steady voltage for precise light metering and shutter speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStay flexible on the go?\u003c\/strong\u003e In emergencies, LR44 alkaline batteries also work, which you can find in almost any grocery store worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eScope of delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x battery adapter (sleeve)\u003c\/li\u003e\n\u003cli\u003e4x button cells (SR44 silver oxide or LR44 alkaline, depending on choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: technical plastic (PLA+)\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003cli\u003eCompatible cells: 4x SR44 \/ LR44 \/ AG13\u003c\/li\u003e\n\u003cli\u003eReplaces: V28PX, 4SR44, PX28, 4LR44 (6V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis adapter makes the search for overpriced special batteries unnecessary. It bundles four standard button cells into a 6V block that mechanically matches a V28PX or 4SR44 exactly. Made from technical plastic, it fits perfectly into the battery compartment of your medium format or 35mm camera.\u003c\/p\u003e\n\u003cp\u003eFor cameras like the Pentax 67 or Canon A series, we recommend the SR44 version, as silver oxide cells keep their voltage stable until the end. LR44 are the affordable backup solution for emergencies.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul style=\"columns: 2;\"\u003e\n\u003cli\u003ePentax 67\u003c\/li\u003e\n\u003cli\u003eMamiya RZ67 \/ Pro II\u003c\/li\u003e\n\u003cli\u003eMamiya 645 \/ Pro TL\u003c\/li\u003e\n\u003cli\u003eCanon AE-1 \/ Program\u003c\/li\u003e\n\u003cli\u003eCanon A-1 \/ AV-1 \/ AT-1\u003c\/li\u003e\n\u003cli\u003eCanon F-1 New\u003c\/li\u003e\n\u003cli\u003eBronica ETRS \/ ETRSi\u003c\/li\u003e\n\u003cli\u003eYashica FR \/ FR-1\u003c\/li\u003e\n\u003cli\u003eMinox 35 (various models)\u003c\/li\u003e\n\u003cli\u003eContax RTS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"1x Adapter with 4x LR44 batteries","offer_id":52443728183636,"sku":"1163b","price":19.95,"currency_code":"EUR","in_stock":true},{"title":"Extra power: 1x Adapter with 4x SR44 batteries","offer_id":52443728216404,"sku":"1163b + 1042v x4","price":24.95,"currency_code":"EUR","in_stock":true},{"title":"Refill pack: 4x SR44 batteries","offer_id":52443728249172,"sku":"1042v x4","price":12.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/products\/61jyOtHMp2L.jpg?v=1755606320"},{"product_id":"px625-batterie-adapter-fur-rollei-35-olympus-om-1-canon-f1-ftb-minolta-srt-mehr","title":"PX625 O-Ring Battery Adapter for Rollei 35, Olympus OM-1, Canon F-1 \u0026 Minolta SRT","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOld mercury battery dead?\u003c\/strong\u003e The original PX625 (1.35V) are no longer available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight meter inaccurate?\u003c\/strong\u003e Modern 1.5V batteries distort your camera’s readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe solution:\u003c\/strong\u003e Our set with a rubber ring and 1.4V zinc-air battery provides the correct voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e 2x O-ring adapters, 1x battery pack (Type 675)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet:\u003c\/strong\u003e Standard + 1x universal light seal set including mirror damper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete:\u003c\/strong\u003e Set + 1x extra battery pack (Type 675)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Rubber (insulating \u0026 precise fit)\u003c\/li\u003e\n\u003cli\u003eVoltage: 1.4V (zinc-air, replaces 1.35V mercury)\u003c\/li\u003e\n\u003cli\u003eCompatibility: Only for battery compartments with contacts top and bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eThis set lets you power your analog camera with modern zinc-air technology. The rubber ring centers the smaller 675 battery in the PX625 battery compartment. Since zinc-air batteries have a voltage of 1.4V (very close to the original 1.35V mercury batteries), the light meter works accurately again. Conventional 1.5V alkaline batteries would cause exposure errors.\u003c\/p\u003e\n\u003cp\u003ePlease note: Zinc-air batteries are activated by removing the sticker and need air to operate. They have a lifespan of about 3–6 months after activation.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for cameras that draw battery power from contacts at top and bottom:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLeica SL2 (tapered battery compartment)\u003c\/li\u003e\n\u003cli\u003eRollei 35, 35S, 35T\u003c\/li\u003e\n\u003cli\u003eOlympus OM-1\u003c\/li\u003e\n\u003cli\u003eCanon F1 (old), FTb, FT-QL\u003c\/li\u003e\n\u003cli\u003eMinolta SRT 100, 101, 303\u003c\/li\u003e\n\u003cli\u003eNikon F (Photomic), Nikkormat FT\u003c\/li\u003e\n\u003cli\u003ePentax Spotmatic F\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"Standard: Adapter + Batteries","offer_id":51112787870036,"sku":"1019b","price":16.95,"currency_code":"EUR","in_stock":true},{"title":"Set: Adapter + Light Seal","offer_id":54014866751828,"sku":"1019b + 1078b","price":29.5,"currency_code":"EUR","in_stock":true},{"title":"Complete: Adapter + Light Seal + Batteries","offer_id":54014866850132,"sku":"1019b + 1078b + 1001v","price":33.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/Startbild_Wasistes.png?v=1767092004"},{"product_id":"gegenlichtblende-bw-55a-fur-canon-fd-35mm-f-2-f-3-5-auch-s-s-c","title":"Lens hood BW-55A for Canon FD 35mm f\/2, f\/3.5 S.S.C.","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal lost?\u003c\/strong\u003e High-quality replacement for the often missing BW-55A lens hood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashed-out image?\u003c\/strong\u003e Minimizes stray light and lens flare for better contrast.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed protection?\u003c\/strong\u003e Effectively shields the front lens from bumps and scratches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ch3\u003eScope of delivery\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1x Lens hood (Type BW-55A)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: PLA+ (biocompatible plastic)\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eMount: Bayonet (like the original)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDescription\u003c\/h3\u003e\u003cp\u003eThis lens hood is a precise reproduction of the classic Canon BW-55A. It attaches to your lens with a bayonet mount just like the original and fits securely without blocking the filter thread. Besides reducing disturbing side light, it offers your front lens extra physical protection in everyday use. Made from sturdy, technical plastic, it is the ideal addition to your Canon FD system.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCanon FD 35mm f\/2\u003c\/li\u003e\n\u003cli\u003eCanon FD 35mm f\/2 S.S.C.\u003c\/li\u003e\n\u003cli\u003eCanon FD 35mm f\/3.5\u003c\/li\u003e\n\u003cli\u003eCanon FD 35mm f\/3.5 S.S.C.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ausgeknipst","offers":[{"title":"Default Title","offer_id":50787127656788,"sku":"1470p","price":24.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/files\/DSC00012_7e3439f4-60e7-4b7e-b0a2-de5095f6b9b7.jpg?v=1731514672"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/3649\/4676\/collections\/canon-f1n.png?v=1741620532","url":"https:\/\/ausgeknipst.fr\/en\/collections\/accessories-for-canon-f-1-f1n.oembed","provider":"Ausgeknipst","version":"1.0","type":"link"}